|
DMX for the OpenFirefli is here! |
|
Ha ve you been following the OpenFirefli forum? The community has produced a working DMX firmware and configuration client for the OpenFirefli controller. Follow the progress on our forums. This is FREE firmware, FREE source code, and a FREE config utility!
Dimming curves, CHECK! Up to 160 pixels, CHECK! Slave mode or individual control, CHECK! Configurable grouping, CHECK!
|
|
Read more...
|
|
|
DMX for the OpenDCx16 is here! |
|
Have you been following the OpenDCx16 forum? The community has produced a working DMX firmware and configuration client for the OpenDCx16 controller. Follow the progress on our forums. This is FREE firmware, FREE source code, and a FREE config utility!
|
|
DMX for the OpenACx16 is here! |
|
Have you been following the OpenACx16 forum? The community has produced a working DMX firmware and configuration client for the OpenACx16 controller. Follow the progress on our forums at THIS LINK. This is FREE firmware, FREE source code, and a FREE config utility!
|
|
 ON SALE NOW!!
Firefli Extensions are now available in the store. Our Firefli pixel string extension allows you to place your Firefly controller up to 3 meters (about 10 feet) away from your pixel strings. We have engineered these extensions with smart signal boosting technology to ensure high signal integrity so that your Firefli pixels will respond flawlessly! Need more than 3 meters?? Simply, connect another Firefli extension and double your distance to 6 meters.
- Connect up to 5 extensions
- Connect up to 5 pixel strings per controller
- Use an extension between slave strings for further string separation
|
|
Firefli Multi/Slave String Support Launched! |
|
 We are happy to launch our latest NO CHARGE firmware update to the Firefli.
Firmware v2.0 now supports multiple strings in a "slave" mode. Pixel strings may be joined end-to-end
in order to cover a larger area. These secondary strings will perform identical lighting effects as the first
string. In other words, if string #1, pixel #1 is set to twinkle, then, string #2, pixel #1 will also twinkle
(as will pixel #1 on ALL other strings). There are no sequencing changes required to use multiple strings!
- Download the firmware HERE.
- Additional pixel strings are available in the store HERE.
- Each string of 16 pixels consumes about 1A of 12VDC power.
- With the power supply that is provided with the Firefli system, a maximum of two strings may be connected.
- An "upgraded" 5A power supply (5 strings) will be available in the store shortly.
- The D-Light Hardware Utility v2.4.1 (or higher) is required to configure the number of
slave strings(and to perform other configuration functions).
- The D-Light USB485 V2 Adapter must be used to perform firmware updates
via the D-Light Firmware Updater v2.2.0.
|
|
|
